Utilization of Copper Slag as Fine Aggregates in Cement

2017-2-16  Utilization of Copper Slag as Fine Aggregates in Cement Concrete Pavements Thongam Prantic Singh#1, Dr.Rajashekhara.M.R*2, Suhas R#3 #1M. T ech Stu dn,H igw ay olDCEB rI #2P rof es ,Dp atm nC iv lE gS B Id #3 Assistant Professor, Department of Construction Technology & Management, DSCE, Bangalore, India

Study on Utilization of Copper Slag as Fine Aggregate in

Study on Utilization of Copper Slag as Fine Aggregate in Geopolymer Concrete K.Mahendran1, N.Arunachelam2 polymer called “Geopolymer” to replace the cement in concrete. It is synthesized

Study on Utilization of Copper Slag as Fine Aggregate

This study evaluates the strength of geopolymer concrete having fly ash as the major binding material and the sand a fine aggregate was replaced with copper slag of 40% and glass fiber to enhance

USE OF COPPER SLAG AS FINE AGGREGATE A CASE

2018-12-2  The use of copper slag in cement and concrete provides potential environmental as well as economic benefits for all related industries, particularly in areas where a considerable amount of copper slag is produced. The addition of copper slag as fine aggregate in

Utilization of Copper Slag as Fine Aggregate in

Utilization of Copper Slag as Fine Aggregate in Cement Concrete In the present scenario, as a result of continuous growth in population, rapid industrialization and the accompanying technologies involving waste disposal, the rate of discharge of pollutants into the atmosphere, copper slag is one of the industrial waste which comes out from

Study of the Properties of Concrete Containing Copper

2019-7-1  Study of the Properties of Concrete Containing Copper Slag as a Fine Aggregate . Srinivas C. H1*, S. M Muranal2 1Department of Civil Engineering, Rural Engineering College, Hulkoti-588205 . 2Department of Civil Engineering, Basaveshwar Engineering College, Bagalkot-587102 . Abstract Copper slag is one of the materials which is considered as waste materials in the production of copper,

Partial Replacement of Copper Slag as Fine Aggregate

2019-1-24  of copper slag as a fine aggregate on the properties of cement mortars nd concrete”, Construction and Building Materials, Vol. 25, pp. 933-938, 2011. [5] Al-Jabri, K.S., Taha, R.A., Al-Hashmi, A. and Al-Harthy, A.S. “Effect of copper slag and cement by-pass dust addition on mechanical properties of concrete”, Construction and building

Use of copper slag as a replacement for fine aggregate in

2014-5-17  use of copper slag as a replacement for fine aggregate is investigated. Three slender reinforced concrete columns of 150x150x2500mm were tested for monotonic axial compression load until failure. The concrete mix included ordinary Portland cement, fine aggregate, 10mm coarse aggregate and copper slag.

Utilization of Copper Slag as Fine Aggregate in

Utilization of Copper Slag as Fine Aggregate in Cement Concrete In the present scenario, as a result of continuous growth in population, rapid industrialization and the accompanying technologies involving waste disposal, the rate of discharge of pollutants into the atmosphere, copper slag is one of the industrial waste which comes out from

USE OF COPPER SLAG IN CONCRETE AND CEMENT

2016-11-7  To study the effect of copper slag substitution as a replacement for fine aggregates on the strength of cement mortars, specimens were prepared with different percentages of copper slag (by weight). The percentage of copper slag added were as follows: 0% (for the control mix ), 20%, 40%, 50%, 60%, 80% and 100%. Cubes (70.6

Study of the Properties of Concrete Containing Copper

2019-7-1  Study of the Properties of Concrete Containing Copper Slag as a Fine Aggregate . Srinivas C. H1*, S. M Muranal2 1Department of Civil Engineering, Rural Engineering College, Hulkoti-588205 . 2Department of Civil Engineering, Basaveshwar Engineering College, Bagalkot-587102 . Abstract Copper slag is one of the materials which is considered as waste materials in the production of copper,

(PDF) USE OF COPPER SLAG IN CONCRETE AND

Fine grained powder the vary of 40-50% might probably replace sand in concrete of copper scum is used as a supplementary cementing mixture and in cement mortars to attain strength and material to concrete and in cement clinker sturdiness needs. production. though there area unit several studies that are reported by investigators from

Experimental Study on concrete using Copper Slag as

2018-5-15  cement, fine aggregate, coarse aggregate and copper slag was studied for concrete mix design. The compressive, split tensile and flexural strength of concrete were studied for various replacements of fine aggregate by using copper slag that are 0%, 20%, 40%, 60%, and 80%. At 40% replacement of fine

COPPER SLAG IN CONCRETE AS REPLACEMENT MATERIAL

2020-4-10  replacement for Portland cement. The use of copper slag in the concrete as a replacement for fine aggregate, reduces the costs of disposal, lowers the cost of the concrete and also helps in protecting the environment. Despite the fact that several studies have been reported on the effect of copper slag on the properties of Concrete,

copper slag in concrete as fine aggregate journals

fine aggregate by Copper slag the tensile strength of concrete is more than control mix Concrete International Journal of Earth Sciences and Engineering...

Utilization of Copper Slag in M-Sand as Partial

2017-12-30  copper slag concrete w.r.t conventional concrete V. CONCLUSION By our Project, we conclude that strength of concrete increased by the replacement of M-sand by copper slag, saves concrete material cost. Here we are using OPC of 53 grade, Well graded coarse and fine aggregate. 30% copper slag replacement showed Maximum workability.

Project Report on Copper Slag in Concrete Expert Civil

Today I’m going to be shared about “Project Report on Copper Slag in Concrete” With advantages and disadvantages of copper slag in concrete so let’s get started. Introduction Traditionally soil, stone aggregates, sand, bitumen, cement etc. are used for road construction.

Studies on Concrete Incorporating Copper Slag as a

This paper investigates the possibility of application of copper slag as a waste byproduct from metallurgical factory Krompachy (Slovakia Republic) as a fine aggregate in concrete up to 40-50% replacement of natural filler. Results of these studies confirmed that it is possible to produce concrete with a mean compressive strength of greater 50 MPa at 28 days hardening without any special

COPPER SLAG IN CONCRETE AS REPLACEMENT MATERIAL

2020-4-10  replacement for Portland cement. The use of copper slag in the concrete as a replacement for fine aggregate, reduces the costs of disposal, lowers the cost of the concrete and also helps in protecting the environment. Despite the fact that several studies have been reported on the effect of copper slag on the properties of Concrete,

Experimental Study on concrete using Copper Slag as

2018-5-15  cement, fine aggregate, coarse aggregate and copper slag was studied for concrete mix design. The compressive, split tensile and flexural strength of concrete were studied for various replacements of fine aggregate by using copper slag that are 0%, 20%, 40%, 60%, and 80%. At 40% replacement of fine

INFLUENCE OF COPPER SLAG AS FINE AGGREGATE ON

2020-2-21  mix without copper slag was prepared. The 5 mixes were prepared other than control mix at different replacement levels of CS (0%, 20%, 40%, 60%, 80% & 100%). Fine aggregate was replaced with copper slag. The water/cement (w/c) ratio in all the mixes was kept 0.43. The specimens were tested after 7, and 28 days of curing.

SCOPE OF REPLACING FINE AGGREGATE WITH COPPER

7. Brindha and Nagan (2011) Durability of copper slag admixed concrete. The strength of concrete increases with respect to the percentage of slag added by weight of fine aggregate up to 40% of additions and 15% of cement. 8. Najimi et al (2011) The performance of copper slag contained concrete in

PROPERTIES AND EFFECTS OF COPPER SLAG IN CONCRETE

2016-4-11  6. Replacement of copper slag in fine aggregate reduces the cost of making concrete. REFERENCES [1] Alnuaimi AS,(2012), “Effects of Copper Slag as a Replacement for Fine Aggregate on the Behavior and Ultimate Strength of Reinforced Concrete

STUDY ON COPPER SLAG AND MICRO SILICA EFFECTS IN

2017-8-19  The effective utilization of copper slag in such procedures may lead to reduction in the cost of disposal and leads to less environmental problems. Caijun Shi et al (2008) studied the characteristics of copper slag on the mechanical properties of cement, mortars and concrete and concluded that by the use of copper slag in cement and concrete,

Copper or ferrous slag as substitutes for fine aggregates

2018-11-1  replacement as well as full replacement of fine aggregate in concrete with water cooled copper slag for two different water-cement ratios. It was reported that there was no significant effect on the strength of concrete whereas the durability was found to be similar to or better than the control mix in some cases. Dhir . et al

Concrete mix design using copper slag as fine

Proceedings of the 2nd International Conference on Current Trends in Engineering and Management ICCTEM -2014 17 19, July 2014, Mysore, Karnataka, India S20 Kg/m3 Cement 340 340 340 340 Copper slag (CS) 0 113.4 226.8 340.2 Water 153 153 153 153 Fine aggregate(NS) 567 453.6 340.2 226.8 Coarse aggregate 1278 1278 1278 1278 Total yield (Kg/m3

EXPERIMENTAL STUDY ON PROPERTIES OF STRENGTH

2017-8-11  [1] Brindha, D and Nagan, S (2010). “Utilization of copper slag as a partial replacement of fine aggregate”. International Journal of Earth Sciences and Engineering, Vol.3, No.4, pp.579-585 [2] Wei Wu, Weide Zhang, Guowei Ma “Optimum content of copper slag as a fine aggregate in high Concrete]